Diagram Diagosis

This circuit, enclosed in a small plastic box, can be placed into a bag or handbag. A small magnet is placed close to the reed switch and connected to the hand or the clothes of the person carrying the bag by means of a tiny cord. If the bag is snatched abruptly, the magnet looses its contact with the reed switch, SW1 opens, the circuit starts oscillating and the loudspeaker emits a loud alarm sound. A complementary transistor-pair is wired as a high efficiency oscillator, directly driving a small loudspeaker. Low part-count and 3V battery supply allow a very compact construction.


Parts:

R1 = 330K
R2 = 100R
C1 = 10nF-63V
C2 = 100uF-25V
Q1 = BC547
Q2 = BC327
B1 = 3V Battery or Two AA Cells in Series
SW1 = Read Switch & Small Magnet
SPKR = 8R Loudspeaker (See Notes)


Notes:

* The loudspeaker can be any type; its dimensions are limited only by the box that will enclose it.
* An on-off switch is unnecessary because the stand-by current drawing is less than 20µA.
* Current consumption when the alarm is sounding is about 100mA.
* If the circuit is used as anti-bag-snatching, SW1 can be replaced by a 3.5mm mono Jack socket and the magnet by a 3.5mm. Mono Jack plugs having its internal leads shorted. The Jack plug will be connected to the tiny cord etc.
* Do not supply this circuit at voltages exceeding 4.5V: it will not work and Q2 could be damaged. In any case a 3V supply is the best compromise.

1990 Mercruiser 350 Alternator Wiring Diagram.



Magazin Componente Electronice Cluj Anode Half Reaction.



Alternator Wiring.



68 Charging At 14 8v And Acid Leaking From The Battery Vintage.



Serpentine Alternator Wiring.



Please Note The Fuse Wire Connected To The Starter Solenoid And Not.



Marine Alternator Diagram Mando Alternator Wire Marine Alternator.



Alternator Wiring Question Page 1 450965.



Alternator Regulator Troubleshooting.



Alternator Bracket For The Top Mounting About 15 On Line The Wiring.