When spun abruptly between the fingers, a bipolar stepper motor will generate around 10VAC. If this is stepped up with a small 240V to 6-0-6V transformer in reverse (with collection related secondaries), a small bipolar stepper motor is in a position to powering a standard 5cm through 6cm luminescent sheet at full brightness. These are designed to be powered from 20V to 200VAC (typically 115VAC), producing 1.5 candelas of light - that will dimly light the common room, or competently mild a camp desk. They are manufactured through Seikosha (RS Components Cat. 267-8726).
Circuit diagram:
Luminescent Generator Circuit Diagram
The transformer will have to be a small one (around 100mA or so), in any other case effectivity is compromised. The wires of the motors two segments are regularly paired white & yellow and red & blue. Just some of these sections is employed in the circuit. If a small bipolar stepper motor from a discarded three.5-inch disk power is used, the Luminescent Generator is also constructed into an extraordinarily small enclosure. To maintain speedy, easy spinning of the motor, a geared deal with could also be brought.
Author: Thomas Scarborough - Copyright: Silicon Chip
No comments:
Post a Comment